
FAA20 Embedded NEXCOM Vocoder
Board Manual
This manual has been prepared for the Federal Aviation Administration.
FA100-00107 (March 2004) – Rev 1.0.0 Page 91
8.3.26 PROG
The PROG command is used to update the FAA20 main application
program.
Table 37: PROG Command Syntax
ATTRIBUTE DESCRIPTION
SYNTAX PROG [ACK]
PARAMETERS ACK Acknowledgement Mode. Causes FAA20 to print an
acknowledgement after each S-record line is transmitted.
FLASH NO. Although this command reprograms the flash software blocks, it
does not affect flash configuration parameters.
Program the FAA20 main flash memory..
COM1: prog
> ERASING FLASH (wait for READY)
> READY
> #Records = 1472
> DONE
EXAMPLES
For more information, see Section 7.3.
Comentarios a estos manuales