
FAA20 Embedded NEXCOM Vocoder
Board Manual
This manual has been prepared for the Federal Aviation Administration.
FA100-00107 (March 2004) – Rev 1.0.0 Page 59
8.2 Built-In Help
The FAA20 supports built-in help. The help feature provides command
syntax; thus, it provides a quick reference for using the terminal command
port. The following command reference section not only provides
command syntax, but also provides detailed parameter descriptions.
To access help, type a question mark (?) followed by the ENTER key.
When no additional parameters are specified, a complete list of commands
is printed. For an example of the printed command list, see Figure 29.
Figure 29: Built-In Help (Command List)
COM1: ?
> *****************************************************************
> COMMAND LIST:
> ADAPT BIT CFG CLKDET
> CLKRATE CLKREF CLKSRC COMCFG
> COMECHO COMPROMPT COUNT DELAY
> DM DUMP FLASH FM
> FRAMESIZE GAM IO LED
> LOOP MACRO MCBSP MIX
> OPMODE PROG REM RESET
> ROUTE TEST TONE TRUN
> VERSION VOC WAIT
> Type ? followed by space then command for more info
> *****************************************************************
COM1:
To get help on a specific command, type ? followed by the command name.
For example, see Figure 30.
Figure 30: Built-In Help (Command List)
COM1: ? adapt
> *****************************************************************
> ADAPT [ON|OFF] - Controls rate adapter
>******************************************************************
The command help includes parameters and a brief functional description.
Comentarios a estos manuales